56301A 5043KW Air Cooler

56301A 5043KW Air Cooler

Product introduction

The role of air cooler in industrial equipment is to cool the heat in the equipment to ensure the normal operation of the equipment and maintain a stable temperature. By transferring the heat in the equipment to the surrounding air, the air cooler keeps the equipment within the appropriate temperature range, preventing overheating and damage. Air Cooler Turbine,Industrial Air Cooler,Greenhouse Air Cooler,Cooling System Evaporative Air Cooler Air coolers are widely used in various industrial equipment, such as generators, compressors, transformers, cooling towers, etc. They can be individual devices or a component within a device. In industrial production, the role of air coolers is very important, they can ensure the long-term stable operation of equipment, improve production efficiency and product quality.

Product parameter

Air cooler structure: horizontal placement

Tube bundle type: "GP6X1.95-6-98.2-1.21S-17.32/DR-VIa"

Tube bundle material: SA179 K01200

Fin material: AL 1060

Fan model: G-TF15L4-Z4

Motor model: YB3-160M1-8 380V, 50HZ

Frame type: GJP6×1.95B-15/3F

Note:

1. The medium, temperature and pressure in the pipe should meet the design conditions, and overpressure and overtemperature operation is strictly prohibited;

2, the pipe pressure, temperature, should be slowly step by step, so as not to damage the equipment due to impact heat;

3, the air cooler normal operation, should first open the fan, and then to the tube bundle into the medium, stop the operation, should first stop to the tube bundle into the medium, then stop the fan;

4, the negative pressure operation of the air cooler boot, should first open the air extractor, tube to reach the specified vacuum degree and then start the fan, and then through the tube medium, shut down, according to the opposite procedure, winter operation, open the air extractor, to reach the specified vacuum degree, first through the tube medium, then start the fan, so as not to freeze the tube can not run;

5. When stopping, low pressure steam should be used to purge and clean the condensate to avoid freezing and corrosion.