GL22001 Cracking furnace equipment for sale

GL22001 Cracking furnace equipment for sale

Product introduction

The GL22001 cracking furnace is a state-of-the-art piece of equipment used in the petrochemical industry for the thermal cracking of hydrocarbons. This process involves breaking down large hydrocarbon molecules into smaller, more valuable molecules such as ethylene and propylene. Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment The GL22001 cracking furnace is designed to operate at high temperatures and pressures, making it an essential tool for the production of a wide range of petrochemical products.

The GL22001 cracking furnace consists of a cylindrical vessel with a refractory lining, which is heated by a series of burners located at the bottom of the vessel. The hydrocarbons are fed into the furnace through a series of inlet pipes and are heated to temperatures of up to 900°C. This causes the hydrocarbons to break down into smaller molecules, which are then separated and collected for further processing.

One of the key advantages of the GL22001 cracking furnace is its ability to operate at high pressures. This allows for more efficient cracking of the hydrocarbons, resulting in higher yields of valuable products. Additionally, the GL22001 cracking furnace is designed to be highly energy-efficient, with a heat recovery system that captures waste heat and recycles it back into the process.

The GL22001 cracking furnace is used in a variety of petrochemical applications, including the production of plastics, synthetic rubbers, and other specialty chemicals. Its high efficiency and reliability make it a critical piece of equipment for any petrochemical plant.

In conclusion, the GL22001 cracking furnace is an essential tool for the petrochemical industry. Its ability to efficiently crack hydrocarbons and produce valuable products makes it a critical component of any modern petrochemical plant. With its high efficiency, reliability, and energy-saving features, the GL22001 cracking furnace is an excellent investment for any company looking to improve their petrochemical production capabilities.

Product parameter

Name: Acetic acid cracking furnace

Application: petrochemical industry

Design temperature: 1100-1300℃

Megawatt: 5-50 MW/unit

Specification：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1. before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment

4. Heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.