Well-selling Steam Turbine Condenser and cooler

Well-selling Steam Turbine Condenser and cooler

Product introduction

Application characteristics of air cooler

1. Simple: Air cooler does not need water pump, cooling tower, water pipe and other ancillary equipment, installation and maintenance are very simple.

2. Energy saving: Air coolers do not require additional energy to operate, saving money on electricity and water bills.

3. Wide applicability: Air cooler can be used in various environments and industries, including aviation, ships, automobiles, power plants, industrial equipment, etc.

4. Environmental protection: The air cooler will not produce waste water and waste gas, and will not pollute the environment.

5. Low maintenance cost: air cooler does not need regular cleaning and maintenance, reducing maintenance costs.

6. Good stability: air cooler is not affected by water quality and water pressure and other factors, stability is better than water cooler.

7. Small volume: The air cooler is small in volume, takes up less space, and is suitable for places with limited space.

Product parameter

Air cooler structure: horizontal placement

Tube bundle type: "GP6X1.95-6-98.2-1.21S-17.32/DR-VIa"

Tube bundle material: SA179 K01200

Fin material: AL 1060

Fan model: G-TF15L4-Z4

Motor model: YB3-160M1-8 380V, 50HZ

Frame type: GJP6×1.95B-15/3F

Note:

1. The medium, temperature and pressure in the pipe should meet the design conditions, and overpressure and overtemperature operation is strictly prohibited;Air Cooler Turbine,Industrial Air Cooler,Greenhouse Air Cooler,Cooling System Evaporative Air Cooler

2, the pipe pressure, temperature, should be slowly step by step, so as not to damage the equipment due to impact heat;

3, the air cooler normal operation, should first open the fan, and then to the tube bundle into the medium, stop the operation, should first stop to the tube bundle into the medium, then stop the fan;

4, the negative pressure operation of the air cooler boot, should first open the air extractor, tube to reach the specified vacuum degree and then start the fan, and then through the tube medium, shut down, according to the opposite procedure, winter operation, open the air extractor, to reach the specified vacuum degree, first through the tube medium, then start the fan, so as not to freeze the tube can not run;

5. When stopping, low pressure steam should be used to purge and clean the condensate to avoid freezing and corrosion.