Payment Type:T/T
Incoterm:FOB,CFR,CIF,EXW
Min. Order:1 Set/Sets
Transportation:Ocean
Port:Shanghai
Model No.: Finned Tubes
Place Of Origin: China
Optical Tube Size /dxs: ∅25.4x2.11
Light Tube Material: SA179 K01200
Fin Material: AL 1060
Finned Shape: Spiral fin tube, square fin tube, etc
Use: Water wall, economizer, air preheater, industrial waste heat recovery, air cooler, etc
Packaging: Modules are shipped in bulk/packaged
Transportation: Ocean
Port: Shanghai
Payment Type: T/T
Incoterm: FOB,CFR,CIF,EXW
Spiral Copper Finned Tube for Air Cooler
Product introduction
1, raw material inspection: 1.1 steel pipe inspection (caliber, wall thickness, length, material, pit, crack, straightness, etc.); 1.2 Steel strip inspection (material, width, thickness, notch, fold, etc.); 2, product sample: 2.1 Record winding current voltage, speed, high frequency parameters, sample physical experiment, test outsourcing, pull rate, fusion rate; 2.2 Make process evaluation according to qualified sample parameters; 3, production: 3.1 steel pipe rust, cutting allowance, groove processing; 3.2 Production winding, first inspection (appearance, outer diameter, fold, fin length, spacing, etc.); 3.3 Production and winding, 500 pieces shall be checked in the middle; 3.4 Production winding and final inspection; 4. Rust prevention and packaging.Heat Exchange Finned Tube,Finned Tube Heat Exchanger,Heat Exchange Spiral Finned Tube
Product parameter
Optical tube size /dxs:∅25.4x2.11
Light tube material:SA179 K01200
Fin material:AL 1060
Finned shape:Spiral fin tube, square fin tube, etc
Use:Water wall, economizer, air preheater, industrial waste heat recovery, air cooler, etc
Finned tube production process:
1, raw material inspection:
1.1 steel pipe inspection (caliber, wall thickness, length, material, pit, crack, straightness, etc.);
1.2 Steel strip inspection (material, width, thickness, notch, fold, etc.);
2, product sample:
2.1 Record winding current voltage, speed, high frequency parameters, sample physical experiment, test outsourcing, pull rate, fusion rate;
2.2 Make process evaluation according to qualified sample parameters;
3, production:
3.1 steel pipe rust, cutting allowance, groove processing;
3.2 Production winding, first inspection (appearance, outer diameter, fold, fin length, spacing, etc.);
3.3 Production and winding, 500 pieces shall be checked in the middle;
3.4 Production winding and final inspection;
4, Rust prevention and packaging.