100-150Tons Latest technology cracking equipment

100-150Tons Latest technology cracking equipment

Product introduction

An acetic acid cracking furnace is a device used to decompose acetic acid into ethylene and water. Heating Furnace Equipment The equipment usually consists of a heating furnace and a reactor. Fired Heater Acetic acid cracking furnaces work by heating acetic acid to high temperatures so that it breaks down into ethylene and water. In this process, the temperature, pressure and reaction time should be controlled to ensure the high efficiency and stability of the reaction. Hydrogen Production Eguipment Acetic acid cracking furnace is widely used in chemical, petrochemical, plastics and other fields, and is one of the important equipment for ethylene production.

Product parameter

Name: Acetic acid cracking furnace

Application: petrochemical industry

Design temperature: 1100-1300℃

Megawatt: 5-50 MW/unit

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1. before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4. Heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.