stainless steel cracking furnace for sale

stainless steel cracking furnace for sale

Product introduction

An acetic acid cracking furnace is a furnace used to produce ethylene by decomposing acetic acid into ethylene and water at high temperatures. Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment Acetic acid cracking furnace is widely used in chemical and petrochemical fields, and is one of the important equipment for ethylene production.

The application of acetic acid cracking furnace mainly has the following aspects:

1. Ethylene production: Acetic acid cracking furnace is one of the important equipment for ethylene production. By decomposing acetic acid into ethylene and water at high temperature, ethylene can be produced in large quantities.

2. Production of other organic compounds: Acetic acid cracking furnace can not only produce ethylene, but also can produce other organic compounds, such as propylene, butene, etc.

3. Waste gas treatment: The waste gas produced by acetic acid cracking furnace contains a lot of organic matter and carbon dioxide and other harmful substances, which need to be treated. Generally, catalytic oxidation, adsorption and other methods are used for waste gas treatment to reduce the impact on the environment.

4. Energy recovery: High temperature waste gas produced by acetic acid cracking furnace can be recovered through waste heat recovery technology to improve energy utilization efficiency.

In short, acetic acid cracking furnace has a wide range of applications in chemical, petrochemical and other fields, its production of ethylene and other organic compounds have an important role in promoting the development of various industries.

Product parameter

Name: Acetic acid cracking furnace

Application: petrochemical industry

Design temperature: 1100-1300℃

Megawatt: 5-50 MW/unit

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1. before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4. Heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.