Hydrogen Making Machine H2 Hydrogen Generator

99.999% Hydrogen Making Machine H2 Hydrogen Generator from Natural Gas

Product introduction

Hydrogen producing reformer: Reformer of hydrogen producing plant can be classified according to heating methods of radiation chamber, which can be divided into four ways:

(1) top firing furnace;

(2) side firing furnace;

(3) ladder furnace;

(4) bottom burning furnace.

The top burning furnace is the most widely used, our company also uses this type of furnace, the burner of this type of furnace is arranged at the top of the radiation chamber, the conversion tube heating form is a single row of tubes by double-sided radiation, flame and furnace tube parallel, flame burning from the top down, the flue gas flow direction and the conversion tube medium flow direction is the same, heat transfer mode for and heat transfer. Because of different heat transfer modes, different furnace types have different heat intensity and tube wall temperature distribution. The flame of top-burning furnace is concentrated at the top of the furnace, so the radiative heat transfer capacity is very strong, with very high local heat intensity. At the same time, the pipe wall temperature is also the highest. Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment All the conversion tube rows of the top burning furnace are in the same furnace, compact arrangement, saving land area, suitable for large size, the number of burners is small, dense arrangement on the top of the furnace, fuel distribution pipe and air distribution pipe simplified, but the top structure is more complex.

Product parameter

Name: Hydrogen producing reformer

Application: petrochemical industry

Design temperature: 900-1100℃

Megawatt: 5-50 MW/unit

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1, before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4, heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.