Cracking cracking device, using desulfurization catalyst

Cracking cracking device, using desulfurization catalyst

Product introduction

Cracking furnace is a kind of equipment used in petrochemical production. It is mainly used in the process of decomposing raw materials such as petroleum into smaller molecules to produce petrochemical raw materials. Cracking furnaces are used in oil refining, fertilizer, synthetic rubber, plastics and other industries. Its main features include:Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment

1. High temperature and high pressure: Cracking furnace needs to react under high temperature and high pressure conditions, usually the temperature is above 500℃, and the pressure is between dozens and hundreds of atmospheres.

2. Molecular cracking: Cracking furnace is mainly used for molecular cracking reaction, the decomposition of large molecular compounds into small molecular compounds, such as the decomposition of petroleum gas, gasoline, diesel and so on.

3. Long cycle operation: Cracking furnaces need to run for a long time, usually between a few months to a few years, requiring regular overhaul and maintenance.

4. High energy consumption: cracking furnace needs to consume a lot of energy, such as natural gas, gas, etc., large energy consumption, high cost.

5. High safety requirements: cracking furnace is operated under high temperature and high pressure, so it needs to have high safety performance to avoid accidents.

In short, cracking furnace is one of the indispensable equipment in petrochemical production. Its characteristics of high temperature and high pressure, molecular cracking, long cycle operation, high energy consumption and high safety requirements determine its importance and wide application in petrochemical production.

Product parameter

Name: Cracking furnace

Application: petrochemical industry

Design temperature: 800-1100℃

Megawatt: 550-300kw

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1. before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4. Heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.