Cracking furnace for petrochemical production equipment

Cracking furnace for petrochemical production equipment

Product introduction

Pay attention to the use of cracking furnace

1. Safety operation: The operator must possess the relevant safety knowledge and skills and strictly abide by the operation rules and regulations to ensure the safety of the human body and equipment.

2. Temperature control: The temperature control of the cracking furnace is very important, and the temperature control parameters should be set reasonably according to the production process requirements to ensure that the temperature in the cracking furnace is stable in an appropriate range.

3. Material quality: The quality of the material in the cracking furnace has an important impact on the production effect. Appropriate raw materials and additives should be selected to ensure the stability of the material quality.

4. Gas flow control: The gas flow in the cracking furnace is also very important, and the gas flow control parameters should be set reasonably according to the production process requirements to ensure the stability and uniformity of the gas flow.

5. Equipment maintenance: The cracking furnace needs to be maintained regularly to check whether the functions of the equipment are normal, so as to ensure the stability and safety of the equipment.

6. Waste gas treatment: the waste gas produced by cracking furnace needs to be treated to reduce the impact on the environment. Appropriate waste gas treatment equipment should be selected and relevant environmental protection laws and regulations should be strictly implemented.

Product parameter

Name: Cracking furnace

Application: petrochemical industry

Design temperature: 800-1100℃

Megawatt: 550-300kw

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1. before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4. Heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.