hydrogen production equipment industrial hydrogen generator

hydrogen production equipment industrial hydrogen generator

Product introduction

The main corrosive media of light hydrocarbon steam conversion plant are hydrogen, carbon dioxide, chemical purification process and potassium carbonate in Benfield solution. Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment High temperature and maintaining certain pressure in the process of gas production can easily lead to high temperature oxidation and aging failure of materials. In addition, the high sulfur content of fuel can also lead to dew point corrosion of flue gas.

The main measures of process anticorrosion are:

① Strengthen fuel desulfurization;

② Desalted water is used for boiler feed water, and dechlorination is used for raw material pretreatment;

(3) Smooth operation to prevent local overheating and thermal shock;

(4) Strictly control the ratio of water to carbon to prevent the dew point of the condensation part from forward corrosion.

Anticorrosive materials can be selected by reference to petrochemical standards.

Product parameter

Name: Hydrogen producing reformer

Application: petrochemical industry

Design temperature: 900-1100℃

Megawatt: 5-50 MW/unit

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1, before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4, heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.