Sale price of GL22024 cracking furnace

Sale price of GL22024 cracking furnace

Product introduction

GL22024 cracking furnace is a kind of equipment for pyrolysis of organic material at high temperature, the principle is to use high temperature heating to decompose organic material into smaller molecules, so as to obtain the required product.

The main components of GL22024 cracking furnace include furnace body, heater, temperature controller, reactor and so on. Before use, it is necessary to add the organic matter in the reactor to the furnace body, and set the required temperature and time, and then start the heater to heat up the furnace body, when the temperature reaches the set value, the organic matter in the reactor begins to decompose and produce the required product.

The GL22024 cracking furnace has the following advantages: first, it can efficiently crack organic matter, thereby increasing the yield and purity of the product; Secondly, due to the high temperature heating method, the reaction speed is faster and the reaction time is short, thus improving the production efficiency; Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment In addition, due to the advantages of simple structure, easy operation and low maintenance cost, the equipment is widely used in chemical, pharmaceutical, food and other fields.

GL22024 cracking furnace also has some disadvantages, such as: first, due to the use of high temperature heating method, it needs to consume a lot of energy; Secondly, it is necessary to maintain the sealing of the reactor during the operation, otherwise it may cause injury to the operator; In addition, it is also necessary to pay attention to the control of temperature and time during use to avoid harmful substances.

In short, GL22024 cracking furnace is an efficient, fast, easy to operate and maintain equipment, widely used in chemical, pharmaceutical, food and other fields. Pay attention to safe operation during use, and adjust and optimize according to actual requirements.

Product parameter

Name: Acetic acid cracking furnace

Application: petrochemical industry

Design temperature: 1100-1300℃

Megawatt: 5-50 MW/unit

Specification：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1. before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment

4. Heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.