Steam superheater for sale in convection section

Steam superheater for sale in convection section

Product introduction

The superheater convection section of a steam boiler is a critical component that plays a significant role in the overall performance of the system. This section is responsible for increasing the temperature of the steam by transferring heat from the flue gas to the steam.

The superheater convection section consists of a series of tubes that are arranged in a specific pattern to maximize heat transfer. The tubes are typically made of steel or other high-temperature alloys that can withstand the harsh conditions of the boiler environment.

The operation of the superheater convection section is relatively simple. As hot flue gas flows through the tubes, heat is transferred to the steam, Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment which increases its temperature and pressure. The steam then flows out of the superheater and into the turbine, where it is used to generate electricity.

One of the key challenges in designing and operating a superheater convection section is ensuring that the tubes are able to withstand the high temperatures and pressures that are present in the system. This requires careful selection of materials and design features that can withstand these extreme conditions.

Another important consideration is ensuring that the superheater convection section is properly maintained and inspected on a regular basis. This helps to identify any potential issues before they become major problems, and can help to extend the life of the system.

Overall, the superheater convection section is a critical component of any steam boiler system, and plays a key role in ensuring that the system operates safely and efficiently. With proper design, operation, and maintenance, this section can provide reliable and consistent performance for many years to come.

Product parameter

Name：Steam superheater

Application field：Petrochemical industry

Design temperature：800-1100℃

Megawatt：5-50 MW/ unit

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1, before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4, heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.