Good quality GL22049 steam superheater

Good quality GL22049 steam superheater

Product introduction

The superheated steam furnace is an essential component of many industrial applications, including power generation, chemical processing, and oil refining. This furnace is designed to produce superheated steam, which is steam that has been heated to a temperature above its boiling point at a particular pressure. The superheated steam is then used to power turbines, heat exchangers, and other equipment in the industrial process.

The superheated steam furnace consists of several key components that work together to produce the desired result. These components include the furnace chamber, the Heat Exchanger, the burner, and the control system.

The furnace chamber is the central component of the superheated steam furnace. It is where the fuel is burned to produce heat, which is then transferred to the heat exchanger. The furnace chamber is typically made of high-quality steel or other heat-resistant materials to withstand the high temperatures and pressures involved in the process.

The heat exchanger is responsible for transferring the heat from the furnace chamber to the water or steam that flows through it. This process involves a series of tubes or pipes that are arranged in a specific pattern to maximize heat transfer efficiency. The heat exchanger can be made of various materials, including steel, copper, or titanium, depending on the specific application.

The burner is responsible for igniting the fuel and maintaining a steady flame inside the furnace chamber. Burners can use a variety of fuels, including natural gas, propane, oil, or coal. The type of fuel used will depend on factors such as cost, availability, and environmental regulations.

The control system is responsible for regulating the temperature and pressure inside the furnace chamber to ensure that the superheated steam is produced at the desired temperature and pressure. Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment The control system uses sensors and feedback mechanisms to monitor and adjust the various components of the furnace to maintain optimal performance.

In conclusion, the superheated steam furnace is a complex system that requires careful design and operation to produce the desired results. The furnace chamber, heat exchanger, burner, and control system must all work together seamlessly to produce superheated steam that meets the specific needs of each industrial application. With proper maintenance and operation, these components can provide reliable and efficient performance for many years.

Product parameter

Name：Steam superheater

Application field：Petrochemical industry

Design temperature：800-1100℃

Megawatt：5-50 MW/ unit

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1, before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4, heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.