100L 200L Stainless Steel Horizontal Design Storage Tank

100L 200L Stainless Steel Horizontal Design Storage Tank 

Product introduction

Stainless steel storage tank mainly consists of the following parts:

1. Tank body: usually made of stainless steel plate, with excellent corrosion resistance and high temperature resistance.

2. Import and export pipes: used for the entry and exit of the liquid in the tank, usually including the inlet pipe, outlet pipe, exhaust pipe, level gauge pipe, etc.

3. Support structure: Used to support the tank body, usually including support feet, support ring, support frame, etc.

4. Stirring device: used to stir the liquid in the tank, usually including agitator, motor, reducer, etc.

5. Heating device: used to heat the liquid in the tank, usually including heating tube, heater, temperature controller, etc.

6. Insulation layer: used for heat preservation and to keep the temperature of the liquid in the tank stable, usually including insulation material, insulation board, insulation coating, etc.Reactor Tanks Vessel,Reactor Equipment Sales,Stainless Steel Reaction Reactor

7. Safety valve: used to protect the pressure in the tank does not exceed the safe value, usually including pressure gauge, safety valve, bursting disk, etc.

8. Liquid level gauge: used to monitor the liquid level height in the tank, usually including float level gauge, radar level gauge, pressure level gauge, etc.

9. Blowdown device: used to discharge the waste liquid in the storage tank, usually including blowdown valve, bottom valve, blowdown pipe, etc.

The above is the main components of stainless steel storage tank, high Pressure Vessel tower the specific components should be adjusted and designed according to different occasions and requirements.

Product parameter

Working pressure /MPa: -0.1~20

Operating temperature /℃: -40~350

Considerations for pressure vessels

1. Follow the operation specifications and safe operation procedures of the pressure vessel, and strictly follow the operation manual.

2. Check and maintain regularly to ensure the safety performance of the pressure vessel.

3. The operating environment of the pressure vessel should be dry, ventilated and free of corrosive gas. Avoid using the pressure vessel in the environment of damp and corrosive gas.

4. Before applying pressure inside the pressure vessel, check the tightness of the vessel to ensure no leakage.

5. The inside of the pressure vessel should be cleaned regularly to avoid the accumulation of impurities and dirt, affecting the service life of the vessel.

6. During the use of the pressure vessel, the pressure in the vessel should be strictly controlled to avoid exceeding the bearing range of the vessel and leading to the explosion of the vessel.

7. When using the pressure vessel, attention should be paid to the setting and inspection of the safety valve to ensure that when the pressure inside the vessel is too high, the safety valve can be started in time to release the pressure.

8. When using pressure vessels, attention should be paid to the safety of the surrounding environment to avoid injuries and losses caused by the explosion of the vessels to the surrounding personnel and equipment.