biodiesel distillation column tower

biodiesel distillation column tower

Product introduction

Main features of the tower:

(1) Good mass and heat transfer effect;

(2) Good plugging performance, easy to operate;

(3) high gas-liquid load and less entrainment of fog and foam;

(4) The tray pressure is reduced, and the system resistance is small;

(5) Good dust removal and absorption performance, up to 98%.

Note:

(1) Equipment lifting shall take off and land smoothly, and shall not be impacted;

(2) The installation should be stable and firm, and the tower should be vertical. In the windy area, the tower should be strengthened; (3) Pay attention to the water level at the bottom of the tower to prevent liquid from entering the air duct;

(4) Prevent sundries from entering the tower and blocking the channel and pipeline;

(5) Start the absorbent water pump, turn on the fan, and enter the system after normal operation; (6) The pump flow should be adjusted when the system is running to prevent too large or too small influence on the use effect.

Product parameter

Working pressure /MPa: -0.1~20

Operating temperature /℃: -40~350

Considerations for pressure vessels

1. Follow the operation specifications and safe operation procedures of the Pressure Vessel, and strictly follow the operation manual.

2. Check and maintain regularly to ensure the safety performance of the pressure vessel.

3. The operating environment of the pressure vessel should be dry, ventilated and free of corrosive gas. Reactor Tanks Vessel,Reactor Equipment Sales,Stainless Steel Reaction Reactor Avoid using the pressure vessel in the environment of damp and corrosive gas.

4. Before applying pressure inside the pressure vessel, check the tightness of the vessel to ensure no leakage.

5. The inside of the pressure vessel should be cleaned regularly to avoid the accumulation of impurities and dirt, affecting the service life of the vessel.

6. During the use of the pressure vessel, the pressure in the vessel should be strictly controlled to avoid exceeding the bearing range of the vessel and leading to the explosion of the vessel.

7. When using the pressure vessel, attention should be paid to the setting and inspection of the safety valve to ensure that when the pressure inside the vessel is too high, the safety valve can be started in time to release the pressure.

8. When using pressure vessels, attention should be paid to the safety of the surrounding environment to avoid injuries and losses caused by the explosion of the vessels to the surrounding personnel and equipment.