GLR2133 Torch dispenser RQ21274 Lianyungang Shengao

GLR2133 Torch dispenser RQ21274 Lianyungang Shengao

Product introduction

The torch separating funnel, also known as the Bunsen funnel or the T-shaped funnel, is a laboratory apparatus used for separating immiscible liquids. It is a simple device that consists of a T-shaped glass tube with a stopcock at the bottom and two arms of unequal length. The longer arm is used for pouring the liquid into the funnel, while the shorter arm is used for draining the separated liquid.

The torch separating funnel works on the principle of density. When two immiscible liquids are poured into the funnel, they will form two distinct layers due to their differing densities. The stopcock at the bottom of the funnel is then opened, allowing the denser liquid to flow out first, leaving the lighter liquid behind.

The torch separating funnel is commonly used in chemistry experiments to extract a desired substance from a mixture of liquids. For example, it can be used to extract an organic compound from an aqueous solution or to separate two immiscible solvents.

To use the torch separating funnel, first, ensure that the stopcock is closed. Reactor Tanks Vessel,Reactor Equipment Sales,Stainless Steel Reaction Reactor Then, pour the mixture of liquids into the longer arm of the funnel. Allow the liquids to settle and form two distinct layers. Next, open the stopcock slowly to allow the denser liquid to flow out into a separate container. Once all of the denser liquid has been drained, close the stopcock and pour the remaining lighter liquid into another container.

It is important to note that the torch separating funnel should be cleaned thoroughly after each use to prevent contamination of subsequent experiments. It should be rinsed with an appropriate solvent and dried before storage.

In summary, the torch separating funnel is a useful laboratory apparatus for separating immiscible liquids based on their density. It is easy to use and can be applied in various chemistry experiments. Proper cleaning and maintenance are essential for its longevity and accuracy.

Product parameter

Working pressure /MPa: -0.1~20

Operating temperature /℃: -40~350

Considerations for pressure vessels

1. Follow the operation specifications and safe operation procedures of the Pressure Vessel, and strictly follow the operation manual.

2. Check and maintain regularly to ensure the safety performance of the pressure vessel.

3. The operating environment of the pressure vessel should be dry, ventilated and free of corrosive gas. Avoid using the pressure vessel in the environment of damp and corrosive gas.

4. Before applying pressure inside the pressure vessel, check the tightness of the vessel to ensure no leakage.

5. The inside of the pressure vessel should be cleaned regularly to avoid the accumulation of impurities and dirt, affecting the service life of the vessel.

6. During the use of the pressure vessel, the pressure in the vessel should be strictly controlled to avoid exceeding the bearing range of the vessel and leading to the explosion of the vessel.

7. When using the pressure vessel, attention should be paid to the setting and inspection of the safety valve to ensure that when the pressure inside the vessel is too high, the safety valve can be started in time to release the pressure.

8. When using pressure vessels, attention should be paid to the safety of the surrounding environment to avoid injuries and losses caused by the explosion of the vessels to the surrounding personnel and equipment.